A Bullseye in the Pot

I retrieved that bouncy acorn cap from inside the pot and set up a proper target run! To adjust the trajectory of my staff catapult, I rolled the rubber-tired copper wheel an inch closer to the blunt end, altering the pivot ratio. I docked the little wooden cap on the short side, stepped back, and jumped straight down onto the high red spearhead with both boots! Whack! The seesaw flipped with a sharp snap, sending the acorn cap rocketing into a clean, tight arc. It flew straight through the small circular drainage hole at the base of the terracotta pot with a bright clatter! Direct hit on the very first calibration!