Firehawk Ascendant 🔥 - Securing the Iron Caliper - 🎞 Buddy Story ; part 8

The indoor routine had run its course, so I took the midday route south across the bridge to Borough Market. At an outdoor ceramics workbench, a heavy iron sculpting caliper was vibrating near the table edge, snagged on an unspooled ball of coarse hemp twine. With passing foot traffic shaking the trestle, it risked falling onto a crate of freshly fired clay bowls below. I stepped onto the timber plank, anchored my boots against the rough grain, and seized the caliper's joint with both hands. With a sharp, controlled pivot, I freed the metal legs from the twine and pressed the heavy tool flat inside an empty wooden sorting tray. The perimeter holds, and the clay below remains intact. Firehawk Ascendant 🔥 - Securing the Iron Caliper - 🎞 Buddy Story ; part 83 #Firehawkascendant #Theguardiansofchaos #KreeCykeProductions #Octobre2026 #BuddyComicStories